Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across West Hollywood
Most gate repairs in West Hollywood come down to one thing: an older automated system that stopped cooperating. The gate won’t open, sags onto the driveway, or the motor hums and does nothing. We fix those problems every week, usually the same day we hear about them. Hal Gatewood has been repairing gates since 2001, and this is what our crew does: electric gate repair, hinge and post work, welding, and realignment, all done at your property. If you’re dealing with a gate that won’t move or a pedestrian gate that drags, call us at (350) 247-4763. A live person picks up.
West Hollywood’s gate problems aren’t the same as what you’d find ten miles away. The housing stock is older, the gates are heavier, and a lot of them were retrofitted with automation decades after the original ironwork went in. That layering of old mechanical parts and aging electrical components is exactly what we diagnose first. Our full Gate Repair service covers everything from a seized hinge to a full operator replacement.
Why Gatewood Fence & Gate Is West Hollywood’s Preferred Gate Repair Company
We’re not a national outfit with a rotating crew. Gatewood Fence & Gate is locally owned and owner-operated, and has been since 2001. Hal’s name is on the shop, his address is published, and his license number is public record. The person who answers your call at 2 a.m. is the same person who shows up. That matters in West Hollywood, where gate issues on courtyard apartment buildings and hillside properties don’t wait for business hours.
We know West Hollywood’s buildings. The 1920s Spanish Colonial Revival courts, the Streamline Moderne duplexes, the 1960s stucco walk-ups, and the newer condo boxes near Santa Monica Boulevard all have different gate hardware, different clearances, and different failure patterns. We’ve worked on gates along Harper Avenue, up in the Norma Triangle, and across the flats near Plummer Park. That local familiarity means we arrive already knowing what we’re likely to find.
Every job carries our 90-Day Done Right Promise, in writing. If something isn’t right, one call brings us back. No runaround, no fine print, no arguing. We also offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve received from another company. Seniors and veterans get a permanent 10% discount. These aren’t gimmicks. They’re standing offers.
Our Gate Repair Services in West Hollywood
Electric Gate Repair
Most electric gates in West Hollywood run on LiftMaster, Viking, FAAC, or DoorKing operators. These systems fail in predictable ways: capacitor burnout, limit switch drift, receiver problems, blown fuses, and safety photocells that get knocked out of alignment by delivery trucks or street sweepers. We diagnose the actual fault before replacing anything. On a repair call, the price is quoted and agreed before any work starts. No invoice surprises at the door, ever.
Automatic Gate Repair
Automatic gates in West Hollywood tend to be older than what you’d find in newer neighborhoods. A lot of them were installed in the 1990s and early 2000s, which means the safety features predate current UL 325 requirements, and the wiring has often been patched through multiple ownership changes. We handle opener swaps, loop detector replacements, remote programming, keypad repair, and full safety retrofits with current photocells and contact edges. A gate should never close on a car, a person, or a pet. If yours is capable of doing that, it’s not working properly, and it’s not safe.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. In West Hollywood, many ornamental pedestrian gates were hand-forged in the 1920s and 1930s. The scrollwork survives. The hinge posts, sunk into old concrete footings, often don’t. We repair post footings, replace rotten or rusted posts, re-hang gates with proper clearance, and weld broken hinge barrels back into alignment. Fix the panel without the post and you’ll fix it twice. We say that because we’ve seen it hundreds of times.
Gate Realignment
Gates come out of square over time. Wind load from Santa Ana events, vehicle strikes, settling footings, and ordinary daily cycling all pull a gate off its original plane. On a sliding gate, this means the gate binds against the track and strains the operator. On a swing gate, the latch doesn’t line up and the hinge pins wear unevenly. We realign gates in West Hollywood regularly, often on driveways with slopes, which makes the problem worse. Straightening the panel helps only if the posts and hinges are solid underneath it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in West Hollywood
We service Viking, Ghost Controls, and DoorKing alongside LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. We keep common boards, capacitors, receivers, remotes, and safety edges stocked locally, which means we don’t have to order parts and come back next week for most common repairs. For older Viking and Linear controllers that are no longer manufactured, we source legacy parts when they exist and recommend honest panel upgrades when they don’t. We won’t tell you a 1985 controller is “just as good” as a new one. Sometimes it isn’t, and the smarter money is replacement. We’ll show you the numbers and let you decide.
Common Gate Repair Problems We See in West Hollywood Homes
West Hollywood has its own set of recurring gate failures. Here’s what we see most often, week in and week out:
- Grit and debris in slide gate tracks. Santa Ana winds push fine grit into the V-track and roller carriages. The gate starts grinding, then binding, then burning out the operator. Owners assume the motor failed. It didn’t. The track did.
- Mineral scale seizing hinges and corroding intercom terminals. The hard municipal water in this part of Los Angeles County leaves deposits that lock hinges solid and destroy low-voltage wiring connections. We see this misdiagnosed as a motor or control board failure more often than we’d like.
- Obsolete controllers on 1960s to 1980s courtyard gates. These systems often have no documentation left. Wiring has been spliced through decades of property managers and handymen. We trace what we can, replace what’s unsafe, and bring the panel up to current code when we’re done.
- Wrought-iron pedestrian gates with rotted hinge posts. The original ironwork from the 1920s is often beautiful and worth saving. The post below ground is often not. We weld, we rebuild footings, and we keep the gate that belongs to the building.
Pricing for Gate Repair in West Hollywood, CA
Here are real numbers from our West Hollywood jobs, not vague estimates. A basic electric gate repair, like a capacitor, receiver, or photocell replacement, typically runs $180 to $340. A hinge and post rebuild on a wrought-iron pedestrian gate, including welding and a new concrete footing, usually lands between $450 and $900 depending on the size and condition of the gate. A full operator replacement with new safety photocells and contact edges runs $1,200 to $2,800, and includes the permit coordination through WeHo Building & Safety. A gate realignment is $250 to $600 in most cases. Every quote is agreed before work starts. Our estimates are free, and the price on the estimate is the price you pay.
We Also Serve Cities Near West Hollywood
Our service area extends from West Hollywood into the neighboring communities: Beverly Hills, North Hollywood, Sherman Oaks, and Van Nuys. If you’re a few blocks outside city limits, call anyway. If we can reach you, we will.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in West Hollywood
Yes, in most cases a gate operator replacement in West Hollywood requires a permit through WeHo Building & Safety, which is separate from the City of Los Angeles permitting system. West Hollywood is its own incorporated city, and LA-based contractors who assume LADBS rules apply often get this wrong. We coordinate permits as part of the job and include that in the written quote. Call (350) 247-4763 and we’ll tell you whether your specific repair triggers the permit requirement before you spend a dollar.
You can, but if the hinge post is rotted or the footing has settled, you’ll be straightening it again next year. A gate sags in the post, not in the middle. We always inspect the post and footing first on a sagging gate in West Hollywood, because on older courtyard buildings the post is almost always the problem, not the panel. That’s what we fix, and we weld the hinge barrels while we’re there.
Santa Ana events pack fine grit into slide gate tracks and roller carriages, which accelerates wear on the bearings and causes the gate to bind against the track. The operator then strains, overheats, and eventually fails. If your gate has been getting noisier over the past few months, the track is probably full of debris. We clean and realign the track, replace worn rollers, and then check the operator’s draw. Call us for an honest assessment at (350) 247-4763.
Usually yes, with a caveat. We source legacy parts for older Viking, Linear, and DoorKing controllers when they’re still available. On West Hollywood courtyard buildings, though, we often find decades of undocumented splices and non-standard wiring behind those panels. If the existing controller is unsafe or beyond repair, we’ll show you the cost difference between patching it and replacing it with a modern UL 325-compliant panel. The upgrade is frequently cheaper over two years than nursing a 40-year-old board.
Yes. Under current UL 325 standards, automatic gates must have entrapment protection: photocells across the gate opening, contact edges on the leading and trailing edges, and audible or visual alarms on certain operator types. Older gates installed before those requirements don’t magically become compliant, and if a gate closes on someone, the property owner is liable. We retrofit older West Hollywood gates with current safety equipment on every operator job, and we include it in the written quote. A gate that can close on a person is not working properly.
Call Gatewood Fence & Gate for Gate Repair in West Hollywood
If your gate is down, sagging, grinding, or refusing to close, call us at (350) 247-4763. You’ll get a live person, not a voicemail. Hal or one of his crew will talk through what’s happening, tell you what it’s likely to cost, and schedule a time that works for you. We’ll show up when we say we will, quote the job in writing before any work starts, and stand behind it with the 90-Day Done Right Promise. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving West Hollywood since 2001.