Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Van Nuys
Gate repair in Van Nuys usually costs between $180 and $340 for common fixes like hinge and roller replacement, with full slide-gate operator swaps running $1,200 to $2,400 depending on the motor and track condition. Most jobs we handle in Van Nuys are diagnosed same day, and we show up with the parts that actually fail here: corroded bottom rollers, heat-damaged control boards, and sagged hinge posts. If your gate is stuck, grinding, or sitting crooked on its track, call (350) 247-4763 and you’ll get a person, not a menu.
We’re not a call center that routes you to whoever’s closest. Gatewood Fence & Gate is owner-operated, Hal Gatewood’s name is on the shop, and we have been fixing gates since 2001. We know Van Nuys Boulevard traffic, we know the apartment rows off Roscoe, and we know what Valley heat does to a motor winding by August. Schedules and dispatch are coordinated from our Los Angeles office, and crews serve Van Nuys locally.
Why Gatewood Fence & Gate Is Van Nuys’s Preferred Gate Repair Company
Van Nuys is full of gates that were installed decades ago and never got the maintenance they needed. We see it every week: a sagged gate bowed by uneven loading, a motor that’s been limping on a cracked board since before the last tenant turnover. That’s exactly the kind of job we take on, because our whole approach is repair first. We weld on site, in your driveway or your parking lot, instead of hauling the gate off and handing you a replacement quote for something that could have been fixed for $200.
Hal has been doing this since 2001, and the 90-Day Done Right Promise is in writing on every job. If it’s not done right, one call brings him back. No runaround, no fine print. The person who shows up at your Van Nuys property works for Gatewood Fence & Gate, is background-checked, and has Hal’s cell number. And when you call at 2 a.m. because a gate is stuck open on a rental property off Van Nuys Boulevard, a live person answers. Not a voicemail. Not a chatbot.
Our standing offers are simple and don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The price is quoted and agreed before any work starts, and that’s the price you pay.
Our Gate Repair Services in Van Nuys
We handle the full range of gate work across Van Nuys zip codes 91601, 91604, 90046, and 91352, from electric operators to welding and rust repair. Here’s what most Van Nuys calls actually look like.
Electric Gate Repair
Most electric gate failures in Van Nuys trace back to the control board or the motor windings. Valley summers run 105 to 115°F, consistently 15 to 20 degrees hotter than Santa Monica, and that heat bakes circuit boards until solder joints crack. We diagnose on site and stock boards and motors for FAAC, BFT, Linear, and Viking, so we aren’t telling you to wait a week for a part. A typical electric gate repair in Van Nuys runs $220 to $380.
Automatic Gate Repair
Automatic gate systems are the norm at the apartment complexes along Van Nuys Boulevard and the rental blocks near Panorama City. When an operator fails, every unit sharing that driveway loses access. We prioritize those calls because a gate stuck closed isn’t an inconvenience, it’s twelve families who can’t get home. Operator swaps on older DoorKing and Elite units run $1,200 to $2,400 in Van Nuys, depending on whether the track and rollers are salvageable.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. We weld new hinge barrels, re-set posts that have leaned over decades, and use stainless fixings so you’re not redoing this in three years. On swing gates throughout Valley Glen and Garnsey, we often find the original post set in too-shallow concrete, which is why the gate rubs the driveway by year five. Post and hinge repair in Van Nuys typically runs $280 to $450.
Gate Realignment
Ground-mounted slide gates on roller tracks are everywhere in Van Nuys rental housing. The bottom rollers corrode, the gate drags, the motor strains, and eventually something gives. We replace rollers, re-align the track, and level the gate so the operator isn’t fighting itself. A straightforward realignment runs $160 to $260. If the track extrusion has thermally warped from decades of Valley sun, we’ll tell you straight and price the replacement before we touch anything.
We also handle Gate Repair for lock replacement, weld and rust repair, and full gate access control. Our team does the work on site, so your gate never leaves the property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
We service and stock parts for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Van Nuys, most of what we see in the older apartment stock is original early-90s DoorKing, Elite, and Linear equipment, which means we carry boards, gear sets, and rollers for those units specifically. We can usually complete a same-day repair without waiting on a distributor, which matters when sixteen units are sharing one driveway gate.
Common Gate Repair Problems We See in Van Nuys Homes
- Heat-failed control boards and motor windings. Van Nuys summers hit 105 to 115°F, and motor windings burn out far faster than manufacturers rate them. A four-year-old motor in Van Nuys can look like a ten-year-old motor in a coastal zip code.
- Corroded bottom rollers on ground-mounted slide gates. The 1970s to 1990s apartment complexes around Van Nuys Boulevard and Roscoe were built with shared driveway slide gates. Decades of deferred maintenance means the bottom rollers seize up, the gate drags on the track, and the operator burns itself out trying to push it.
- Santa Ana wind damage along Nordhoff and Victory. Every autumn, weakened or improperly stopped gates get blown off their tracks. The wind funnels through Valley corridors, and a gate that was already loose is a predictable failure waiting for the first big Santa Ana event.
- Sagged gate frames bowed by uneven loading. Tubular steel and wrought iron gates from the 1970s and 80s take a beating. We find gates bowed in the middle from years of being pushed, not serviced, and the post is usually the real problem.
Pricing for Gate Repair in Van Nuys, CA
What you’ll pay depends on what failed, but here are honest ranges for the Van Nuys market. Basic hinge and roller repairs run $180 to $340. Electric gate board or limit-switch repairs typically run $220 to $380. Slide gate operator swap with a new LiftMaster or BFT unit runs $1,200 to $2,400, including the operator, stainless hardware, and labor. Weld and rust repair starts around $150 for a small patch and goes up from there based on how much steel needs attention.
You’ll get the price in writing before any work starts, and that’s what you’ll pay. No trip charge inside the county, $40 off any repair over $200, and a 10% discount for seniors and veterans. Estimates are free. Call (350) 247-4763 and we’ll give you a real number.
We Also Serve Cities Near Van Nuys
We regularly work in Van Nuys and the surrounding areas, including Sherman Oaks, Panorama City, North Hollywood, and Encino. If your property sits near the Van Nuys line, you’re still in our service area, and the same pricing and no-trip-charge policy applies.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Van Nuys
Van Nuys rental stock was heavily built in the 1970s to 1990s, and the gates installed then are now 30 to 50 years old, running on patched boards and worn gear sets that were never replaced. Sherman Oaks has more owner-occupied single-family homes, so gates there tend to get more consistent attention. In Van Nuys, deferred maintenance is the default, which means operators run to complete failure before anyone calls. Call (350) 247-4763 and we’ll tell you whether it’s a repair or a replacement, and we’ll quote it in writing before we start.
Valley heat pushes motor windings past their thermal limits repeatedly, which degrades the insulation and eventually causes the motor to burn out. San Fernando Valley summers run 15 to 20 degrees hotter than coastal LA, and gate motors sitting in direct sun on a metal cabinet absorb even more heat. We see Van Nuys motors fail in half their rated lifespan. If your gate is running slower than it used to, that’s often the first sign.
Yes. Van Nuys’s summer heat and occasional moisture from watering systems rust out plain steel hinges in a few seasons, and then the gate starts sagging and rubbing. Stainless hinges cost a little more up front but don’t need replacing every few years. We use stainless fixings on every Van Nuys gate job for exactly that reason. For a quote, call (350) 247-4763, free estimate, no trip charge.
Santa Ana winds funnel through Valley corridors along Nordhoff and Victory, and any gate that is already loose, improperly stopped, or running on worn rollers gets pushed off its track. It’s a seasonal pattern we see every year. The fix is usually stop hardware, roller replacement, and track realignment, not a new gate. We’ll confirm what’s actually wrong before you spend a dollar.
In Panorama City and Raymer, it’s almost always a slide gate drag caused by corroded bottom rollers and a cracked drive gear. The operator keeps trying to push a gate that won’t move, and eventually the board fails from overwork. Roller and gear replacement there usually runs $180 to $340. Call (350) 247-4763 for an exact quote, and we’ll check the whole track while we’re there.
Call Gatewood Fence & Gate for Gate Repair in Van Nuys
If your gate is stuck, grinding, sagging, or blown off its track, call (350) 247-4763. A live person answers around the clock. We’ll give you a straight answer, a written price, and a repair that’s done right the first time, backed by the 90-Day Done Right Promise. Hal’s name is on the shop, and the shop is down the road. That’s still the oldest kind of accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys and the San Fernando Valley since 2001.