Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tarzana
Gate installation in Tarzana runs anywhere from $1,400 for a basic single swing gate to $12,000+ for a custom hillside slide gate with fire-code compliance hardware, and most jobs take one to three days once materials land. We know the difference between a flatland tract home north of Ventura Boulevard and a steep hillside estate south of it, because that difference changes everything: operator torque, post depth, fire-code retrofits, and whether the existing masonry can even hold a new post. If you’re in Tarzana and need a gate that actually fits your property, call (350) 247-4763 and you’ll reach a live person who knows the area.
Why Gatewood Fence & Gate Is Tarzana’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and he’s still the one who answers the phone, still the one who shows up with the welder, and still the one whose name is on the invoice. Tarzana homeowners call us because they’ve been burned by outfits that quote one price over the phone and deliver another at the door. We don’t do that. The price we hand you before we start is the price on the invoice, period. And every job, from a pedestrian gate on a 1950s ranch to a full security gate on a hillside estate off Reseda Boulevard, carries our 90-Day Done Right Promise in writing. If it’s not done right, Hal comes back and makes it right. No runaround.
We’re not a franchise. We’re not a dispatch queue. We’re a local crew with real addresses and a license number anyone can look up, serving Tarzana week in and week out. The person who shows up is someone you’ll likely see again at the hardware store or the car wash on Ventura. That’s the oldest accountability there is.
Our Gate Installation Services in Tarzana
Driveway Gate Installation
Long private driveways define Tarzana’s hillside streets, and a driveway gate has to do two jobs here: actually secure the property and survive the San Fernando Valley heat. We set posts deep enough for the slope, we size the operator for the real incline load, and we wire in the fire-code override that LAFD requires south of Ventura. A typical driveway gate installation in Tarzana runs $2,800 to $7,500 depending on width, material, and hillside conditions.
Pedestrian Gate Installation
Walk gates matter more than people think, especially on Tarzana lots where a side yard leads back to a pool or a garage. We install self-closing hinges, coded keypads or card readers, and frames that won’t sag into the latch in two years. For a standard ornamental iron pedestrian gate in Tarzana, you’re looking at $800 to $2,200 installed.
Sliding Gate Installation
Cantilever slide gates are the smart choice for a lot of Tarzana driveways, especially the wide ones on boulevard-adjacent properties. They don’t swing into traffic, they don’t drag on the pavement, and they handle long spans well. But Santa Ana winds will find a weak roller or an under-torqued motor fast. We install slide gates rated for the actual span and wind exposure, with rack and pinion components that don’t bend on the first windy October day. Tarzana slide gate installs typically land between $3,500 and $9,000.
Swing Gate Installation
Swing gates are what most Tarzana homes have, north and south of Ventura alike. On flat lots, a properly hung double swing gate is a clean, reliable choice. On a 15-degree hillside driveway, a swing gate needs an operator with enough torque to push the panel uphill every cycle, or you’ll be replacing capacitors every summer. We spec the motor for the slope, not just the panel weight. A single swing gate installation in Tarzana runs $1,400 to $4,800; doubles run $3,000 to $8,500 depending on ironwork and automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
We stock parts and control boards for the brands Tarzana homes actually have: Linear, Elite, Viking, and more. The hill homes south of Ventura are full of legacy Elite and Linear operators from the 1980s and 90s, and we still service many of them when they’re worth saving. When they’re not, we replace with properly rated equipment like a LiftMaster or DoorKing unit that won’t die in its third Tarzana summer. No waiting a week for a part that should have been in the truck.
Common Gate Installation Problems We See in Tarzana Homes
- Legacy operators without UL 325 entrapment protection. A lot of gates installed in the 1980s and 90s in Tarzana predate modern safety sensor requirements. They work until they don’t, and when they fail, code says full replacement, not a patch job. We’ll tell you honestly which side of that line your gate is on.
- Undersized motors on hillside driveways. We keep finding gates on Tarzana hillsides fitted with operators that weren’t rated for the slope. The motor burns out, you replace it, it burns out again. The fix is upsizing the operator and often redoing the post footings. Fixing the panel without the post means fixing it twice.
- Santa Ana wind damage to cantilever gates. Long slide gates on exposed Tarzana drives get knocked off their rollers when the winds howl down through the canyons. We install wind-rated rollers, reinforced rack, and post footings that don’t flex under lateral load.
- Sagging ornamental iron panels. On Tarzana’s Spanish-style estates with heavy iron swing gates, the panel usually isn’t the problem. The hinge post is. We weld on site and replace posts properly, so the gate hangs straight for years instead of dragging on the latch by next spring.
Pricing for Gate Installation in Tarzana, CA
Here’s the honest breakdown for Tarzana. A basic single swing gate starts around $1,400. A double swing gate, which covers most Tarzana driveways, runs $3,000 to $8,500 depending on the ironwork and automation. Sliding gates run $3,500 to $9,000. Pedestrian gates run $800 to $2,200. Hillside installs south of Ventura Boulevard that need fire-code Knox switches, slope-rated operators, and deeper post footings add $400 to $1,800 to the job. Every quote includes the full scope in writing before we start, and the price we quote is the price you pay. Call (350) 247-4763 for a free estimate at your Tarzana home.
We Also Serve Cities Near Tarzana
Gatewood Fence & Gate also serves Gate Installation customers throughout the west San Fernando Valley, including Encino, Reseda, Sherman Oaks, and Northridge. If you’re just over the Tarzana line on a hillside street, call us and we’ll treat your property like the local job it is.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tarzana
Yes, if your property sits in LAFD’s Very High Fire Hazard Severity Zone south of Ventura Boulevard, a Knox switch or equivalent emergency-access override is required on every new automated gate under LAMC. We handle that as a standard part of hillside gate installation in Tarzana. It’s not an add-on we spring on you at the end; it’s baked into the first quote you get. Call (350) 247-4763 and we’ll walk you through what your specific street requires.
Sometimes. If the operator still has functioning safety sensors and the posts are sound, we can often swap the motor, rebuild the hinge side, and add a modern control board without replacing the whole gate. But if the operator predates UL 325 entrapment protection or the posts have rotted or shifted, retrofitting is throwing good money after bad. We’ll show you exactly what’s salvageable before you spend a dollar. Estimates are free.
In the Tarzana hills, repeated motor burnouts almost always mean the operator was undersized for the slope load. A flatland-rated motor pushing a heavy gate up a 15-degree driveway every cycle will eat capacitors and control boards until you either downsize the gate or upsize the operator. This is the single most common thing we correct on hillside properties. Call (350) 247-4763 and we’ll check the actual torque requirement of your driveway.
Fall Santa Ana events hit Tarzana’s long private drives hard, and a cantilever slide gate is basically a huge sail. We see gates knocked off their rollers, rack sections bent, and post footings cracked. The fix is wind-rated rollers, reinforced rack, and deeper footings. If your slide gate rattles on a windy day, get it looked at before the next big blow.
Replace the post. A gate sags in the hinge post, not in the middle, and if you hang a new panel on a worn post you’ll be doing the same job again in two years. We weld on site in your Tarzana driveway and don’t haul your gate to a shop. When we say we fixed it, we mean the whole assembly is right, not just the part you can see.
Why Tarzana’s Hillside Fire Code Changes Everything
South of Ventura Boulevard, Tarzana’s hillside estates sit inside Los Angeles’s Very High Fire Hazard Severity Zone. That means LAFD mandates a Knox switch or equivalent override on every new automated gate, so any full gate replacement we do on those properties isn’t just a gate job. It’s a fire-code compliance install. Flatland Valley neighborhoods like Encino or Sherman Oaks don’t have this requirement at anything close to the same scale. In Tarzana, a gate that can’t be opened by fire crews in an emergency is a code violation and a real safety issue. We handle the permitting paperwork, the switch, and the wiring as part of the install, so you’re not left holding an inspection failure with a gate company that won’t answer the phone.
What a Tarzana Gate Job Actually Looks Like
We got called to a steep driveway off Reseda Boulevard in the Tarzana hills, where a 1990s Elite swing gate operator had burned through three sets of capacitors. The original installers had undersized it for the slope. We upsized to a properly rated LiftMaster unit, poured new post footings, and added a Knox-compliant key switch. The gate has held through two Santa Ana seasons without a service call. We also replaced the worn hinge posts instead of just rehanging the panel, because fixing the panel without the post is how you end up paying for the same job twice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Local, owner-operated, and on the phone 24/7 for Tarzana gate work. One number: (350) 247-4763.