Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Encino Homeowners
A broken hinge or a sagging gate in Encino usually doesn’t mean the whole gate is junk. Most of the time it needs a specific repair: a new hinge, a welded rail, a rebuilt post. That’s the work we do every week at Gatewood Fence & Gate. We fix the gate you already have, right in your driveway, and we’ve been doing it that way since 2001. Hal Gatewood runs the shop, his name is on every invoice, and if you call (350) 247-4763, a live person answers. Not a voicemail. Not a queue. This isn’t one of those national outfits that quotes you one number on the phone and hands you another bill at the door. We quote a price before we touch the gate, and that’s the price you pay.
If you need our Gate Parts & Welding in Encino, you can have us look at it today. The most common fix is a hinge replacement or a weld that has cracked through at the post. Both are jobs we do same-day. If your gate is dragging, binding, or latching wrong, call us. We’ll tell you what we think it is, what it’ll cost, and whether it’s worth fixing at all. Sometimes it isn’t, and we’ll tell you that too.
What Our Gate Parts & Welding Service Includes
Every gate is a collection of parts that work together under load: hinges, posts, rails, rollers, latches. When one fails, it puts strain on everything attached to it. We replace the part that failed and check everything it touches. Here’s what that looks like in practice.
Hinge Replacement
A hinge is the first thing to fail on a gate that gets used daily. In Encino, we see plenty of steel gates where the hinge pin has worn into an oval, which lets the gate drop and drag. We weld new heavy-gauge hinges on site, matching the existing steel so the gate hangs level again. Hal will tell you this directly: if the hinge is worn, the gate will never close right until the hinge is replaced. We don’t shim worn hinges or grease a seized one and call it done. The hinge comes off, a new one goes on, and it’s welded, not bolted.
Post Replacement
A sagging gate is usually a post problem, not a panel problem. The post is what holds the weight, and once it leans or rots at the base, every other part has to compensate. We set new steel posts in concrete, plumbed straight and anchored for the gate’s weight and swing. This is a job that looks simple and isn’t: a post that’s out of plumb by half an inch makes the gate bind at the latch. We check the old post footing before we set the new one, because if the footing was poured shallow, the next post will fail the same way.
Rail Repair
Gate rails crack at the welds when the gate is wracked or the post has moved. We cut out the cracked section, grind it clean, and weld in a repair that’s as strong as the original member. In Encino, we’ve repaired rails on driveway gates, side yard gates, and pool gates, often after another company said the whole gate needed to be replaced. Most of the time it doesn’t. A cracked rail is a one-hour weld for us, and the gate stays in your driveway the whole time.
Custom Welding
Some repairs aren’t a bolt-on part at all. A bracket that’s been broken off, a decorative scroll that’s snapped, a strange-angle brace that no supplier carries. We weld custom pieces in our shop and on site. Hal has been welding since he started the business, and he carries a rig truck to Encino jobs with stick and MIG gear so we can fabricate what the gate needs on the spot. If the piece can be saved, it’s saved. If it has to be made from scratch, it’s made, primed, and painted to match.
Gate Rollers
Sliding gates ride on rollers, and when a roller seizes or flattens, the gate shudders and fights the motor. We carry a range of steel and nylon rollers and replace them on site, aligning the track so the gate rolls clean. We check the track while we’re at it: a gate that’s been running on a bad roller for months usually has a worn spot in the rail. We fix the roller and the rail in one trip, because fixing one without the other just moves the problem down the line.
Latch & Lock
A gate that won’t stay shut is a security problem, plain and simple. We replace surface latches, magnetic latches, keyed locks, and the strike hardware they catch on. Most of what we see in Encino is a latch that’s adjusted wrong or a strike that’s drifted out of alignment. We set the hardware so the gate latches with a solid thunk and the lock turns without fighting it. If you want a keypad or an automated lock added at the same time, we’ll talk you through the options without overselling any of it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We don’t show up with a truck full of generic parts and hope they fit. We carry genuine parts for the gate operators and hardware Encino homeowners actually have on their gates. Over the years we’ve serviced hundreds of LiftMaster operators, and we keep their limit switches, chains, and belts in stock. If your LiftMaster is running but the gate isn’t moving like it should, we can usually diagnose it in the first fifteen minutes. We’re certified to service it, and we know what parts are worth replacing versus what’s worth leaving alone.
We also regularly work on Viking and Ghost Controls equipment. Viking operators show up on a lot of heavier Encino driveway gates, and we service the boards, motors, and the welding on the gates they run. Ghost Controls is a common pick for residential gates, and we keep their arms, brackets, and remotes on hand. We’re also factory-authorized to service DoorKing and Elite, which covers most of the access control systems around town. Whether you have one of those or something else entirely, we can help. A gate part is a gate part, and Hal’s been looking at them for 24 years.
Signs You Need Gate Parts & Welding Right Now
Some gate problems are obvious. Others sneak up on you. Here’s what to look for before the gate stops working entirely.
- The gate scrapes the ground when it opens. That’s a dead giveaway of a worn hinge or a post that’s started to lean. Every time it scrapes, it’s putting more load on the motor and the welds. Get it looked at before the motor burns out too.
- The gate rattles or shakes when it moves. A loose rail or a broken weld lets the gate flex while it’s moving. That flexing leads to bigger cracks. If you can hear the gate working from inside the house, something’s loose.
- The latch doesn’t catch unless you lift the gate. This means the gate has dropped out of alignment. Usually it’s the hinge pin, sometimes it’s the post. Either way, the longer you leave it, the worse the latch and the strike plate get damaged.
- There’s a visible crack in the metal anywhere on the gate. A crack never gets smaller. Weather, gravity, and daily use will open it up until the gate fails. We can weld it clean and repaint it so the repair disappears.
- The gate won’t stay open or won’t stay closed. On a sliding gate, that’s a roller issue or a track problem. On a swing gate, it’s usually a hinge or post. Either way, a gate that moves on its own is dangerous, especially with kids or pets around.
Our Gate Parts & Welding Process - Step by Step
We don’t want you guessing what’s going to happen when you call us. Here’s exactly how a gate parts and welding job goes in Encino.
- 1
Call us and talk to a person. You call (350) 247-4763 and Hal or someone from his crew answers. You describe what the gate is doing. We’ll ask a few questions about the gate type, the material, and when the problem started. No script, no triage.
- 2
We come out and look at it. We schedule a time that works and we show up in that window. Hal will inspect the gate himself: check the hinge pins, the post plumb, the weld lines, the rollers. He’ll tell you what he thinks before he starts taking anything apart.
- 3
You get a written price before any work starts. The quote is the quote. We don’t add labor on the back end. If we find something unexpected, we stop and show you before we spend another dollar. No surprises at the invoice.
- 4
We do the work on site. Hinges get welded, posts get set, rails get repaired in your driveway. The gate doesn’t leave your property. We carry the welding rig and the parts on the truck so most jobs are done the same day we show up.
- 5
We test it and walk you through it. We run the gate a dozen times, check the latch, check the motor if there is one. Then we show you what we did and why. You get our 90-Day Done Right Promise in writing. If anything we fixed isn’t done right, one call brings us back.
How Much Does Gate Parts & Welding Cost in Encino?
A hinge replacement in Encino typically runs $180 to $340 depending on the gate weight and how many hinges are involved - see how much Gate Parts & Welding costs for the full breakdown. A post replacement usually lands between $450 and $900, with the bigger spread because some posts are set in concrete that’s hard to get out and some come out clean. Rail repairs and custom welding work run $150 to $400 for a standard repair, more if we’re fabricating a piece from scratch. Gate roller replacement averages $120 to $260 per roller including labor. Latch and lock service is usually $95 to $220 for most residential gates.
What affects the price most is access: a gate tucked into a hillside in Encino takes longer than one fronting a flat street. Material thickness matters too. A heavy steel gate with 3/16-inch plate costs more to weld than thin tube steel. The best way to avoid overpaying is to get a written quote from someone who has actually looked at the gate. Our estimates are free, and we’ll tell you honestly if the gate is worth repairing at all. We’d rather you know before you spend the money. Call (350) 247-4763 and we’ll schedule a look, no obligation and no trip charge inside the county.
Gate Parts & Welding Near Encino - Our Service Area
We work all over the San Fernando Valley and the west side. Most of our gate parts and welding jobs in Encino start with a call from a homeowner and end the same day. We also handle gate repair in Los Angeles, the east side, and down in Santa Monica. Sherman Oaks, Van Nuys, Tarzana, Reseda, North Hollywood, and West Hollywood are all regular stops. If you’re in Granada Hills or San Fernando, you’re still in our service area, and you still get the same live-person answer when you call. Hal’s address is published, his name is on the shop, and he’s been driving these roads since 2001.
If you’re looking for the broader picture of what we do beyond parts and welding, start with our home page to see the full range of gate services. And if you landed here from a search, you’re on the page for Gate Parts & Welding in Encino, where every price you read is a real price we’ve quoted in this market.
Serving Encino, CA - Our Local Coverage Area
We’re based in the Encino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Encino
Gate parts and welding is the repair service for the structural components of your gate: hinges, posts, rails, rollers, latches, and the steel weld joints that hold them together. When your gate sags, scrapes, or won’t latch, you’re looking at a parts and welding problem, not necessarily a whole new gate. In Encino, we handle these repairs on site with a welding rig and a truck full of gate parts, so the gate never has to be hauled off. We also cover nearby areas like Gate Parts & Welding - Tarzana.
Most hinge replacements, rail welds, and roller swaps are done in under two hours. A post replacement takes longer, usually half a day, because the concrete needs to set before we hang the gate on the new post. When you call, Hal will give you a straight answer on timing based on the specific repair. Most Encino jobs are done the day we come out.
Small repairs like latch adjustments and single hinges start around $95 to $180. Bigger work like post replacement or custom fabrication runs $450 to $900 or more, depending on the steel and access. We also do Reseda Gate Parts & Welding with the same pricing and service. You’ll get a written price before any work starts, and that price is what you pay. We also offer $40 off any repair over $200 and a free second opinion on any written estimate you’ve gotten from another company. Call (350) 247-4763 for an exact quote, the estimate costs you nothing.
Yes, we service Viking and Ghost Controls equipment regularly in Encino. We carry their parts and we’re certified to work on their systems. If the operator works but the gate hardware doesn’t, that’s still a parts and welding job: we’ll reweld the bracket or replace the hinge so the operator doesn’t burn itself out pushing a gate that’s out of alignment. Call us and describe what’s happening; we’ll know what to check first.
We answer the phone 24 hours a day, and we keep room in the schedule for emergency repairs. If your gate has failed and the property is unsecured, call (350) 247-4763 and a live person will answer, not a recording. Hal comes out himself for urgent work in Encino. We don’t charge a trip fee inside the county, and we’ll tell you before we come what to expect.
Every job carries our 90-Day Done Right Promise in writing. That means if the weld cracks or the hinge we hung doesn’t hold, you call us and we come back and make it right. Not ‘up to’ 90 days, not ‘in most cases’. Ninety days, from Hal’s tool kit to your gate. We’ve been standing behind our work in Encino since 2001, and the promise is printed on the invoice.
You don’t need to do much. Clear whatever is within the gate’s swing or slide path so we can work freely. If you have a gate that’s currently stuck halfway open, leave it there and don’t force it. We’ll bring the tools and parts we need. If you can, note when the problem started and whether it got worse quickly or gradually; that helps Hal find the cause faster.
Schedule Your Gate Parts & Welding Service in Encino Today
Call (350) 247-4763 and tell us what your gate is doing. A live person answers, day or night. We’ll schedule a time that works, show up in that window, and give you a written price before we pick up a tool. Free estimate, no trip charge inside the county, and the 90-Day Done Right Promise in writing on every job. Hal Gatewood has been fixing gates in Encino since 2001. You’ll see him on the invoice, and you’ll see him if the repair ever isn’t right. Call today for your free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Encino since 2001.