Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Van Nuys
A new gate installed in Van Nuys typically costs $1,400 to $3,800 for a single swing gate on a standard steel post and frame, and $3,200 to $7,500 for an automated sliding gate with operator, track, and entrapment protection. The price is quoted and agreed before any work starts, so the number we write down is the number you pay. If you call (350) 247-4763, you’ll talk to a live person who can schedule a free measure and written estimate at your Van Nuys property.
We work on gates all over Van Nuys, from the apartment complexes off Van Nuys Boulevard to the single-family homes across Valley Glen and Garnsey. The housing stock here is different from most of Los Angeles, and we plan installations around that. Multi-tenant buildings with shared slide gates, mid-century homes with side-yard pedestrian gates, and newer properties with driveway swing gates each need different hardware, different post depths, and different operator sizing. Our Gate Installation team has been working on Van Nuys gates since 2001, and we know what holds up here because we’ve driven back to the same blocks year after year.
Why Gatewood Fence & Gate Is Van Nuys’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop and on every invoice. That’s not marketing; it’s the oldest form of accountability there is. When a property manager on Raymer or a homeowner near Van Nuys Boulevard calls us, they’re not getting forwarded to a call center three states away. They get a live person, any hour of the day, any day of the week. And the person who shows up is either Hal himself or a uniformed, background-checked member of his crew.
Van Nuys is different from the rest of the Valley when it comes to gates. The rental corridors here are dense, and the gates are shared by multiple tenants. Any gate installation on this side of La Tuna Canyon Road has to account for heavy, continuous use, deferred maintenance, and the fact that nobody’s landlord wants to spend money until the gate literally won’t open. We build for that reality. Thicker posts. Stainless hardware. Operators sized for the duty cycle, not the brochure. A gate sags in the hinge post, not in the middle, and that is where we start. On every job, from a small pedestrian gate to a full security gate, we back the work with our 90-Day Done Right Promise in writing. If it’s not done right, we make it right.
We also answer when you call. Not a voicemail, not a bot. If a slide gate is off its track on Victory Boulevard at 6 a.m., you’ll hear a voice on the line. That matters to the people we serve in Van Nuys who have already been burned by a national outfit that quoted one price on the phone and charged another at the door.
Our Gate Installation Services in Van Nuys
Driveway Gate Installation
We install both single and double driveway gates across Van Nuys, on homes and rental properties. A single steel swing gate with manual operation in Van Nuys usually runs $1,400 to $2,600 installed. A double gate with automation is more, generally $3,500 to $7,000 depending on operator choice and post conditions. Most mid-century lots in Van Nuys are narrower than newer Valley subdivisions, so we measure the actual drive width and order the gate to spec rather than forcing a standard width to fit. That’s how you avoid a gate that can’t open fully because the operator arm was sized wrong from the start.
Pedestrian Gate Installation
Pedestrian gates in Van Nuys get used harder than almost any other hardware on the property. On apartment buildings from the 1970s through 1990s, the pedestrian gate is often the main entry for 20 or more residents plus deliveries. We install tubular steel and wrought iron pedestrian gates with mag locks, keypads, or card readers, and we always set the posts deeper than code minimum because the soil in the flat parts of Van Nuys can get dry and compacted in summer, then soft after winter rain. A typical pedestrian gate install runs $900 to $2,200.
Sliding Gate Installation
Sliding gates are the most common installation we do in Van Nuys, and the need for them here is specific. The rental corridors around Van Nuys Boulevard and Roscoe are full of apartment complexes whose original slide gate operators from the early 1990s are finally dying. When we install a new slide gate or a new operator for one of these properties, the job usually includes replacing corroded bottom rollers, re-welding the rack, and resetting post footings that have shifted over 30 years of heavy use. Our crew handles the entire driveway including the track, motor, safety edges, and access control. The gate has to survive 105-degree summers and the abuse of 24-unit complexes, and that dictates the spec we write.
Swing Gate Installation
For Van Nuys homes on wider lots, usually in the eastern stretches around Valley Glen, swing gates are the natural choice. Both the single-swing and double-swing options are common here, most of them automated. Swing gate hardware in Van Nuys is exposed to two very different enemies: intense UV from Valley summers that degrades plastic and powder coating, and Santa Ana wind that catches a closed gate like a sail. We specify operators with enough torque to hold position in 50 mph gusts, and we use stainless hinges and fixings because the standard zinc-plated hardware will be pitted within a couple of years this close to the coast. A swing gate install in Van Nuys starts at $1,800 and goes up to about $4,500 with automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Van Nuys
We’re certified to work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. In Van Nuys, the two names we see most on old apartment gates are DoorKing and Elite, and on newer residential installs it’s LiftMaster and FAAC. Because Van Nuys is such a concentrated rental market, we keep common parts for BFT, Linear, and FAAC operators stocked in the truck when we head to the neighborhoods around White Oak Avenue and San Diego Freeway. That means fewer return trips, and when a gate has to go back online the same day, we’re not waiting on a distributor in another county. You get a straight answer about what will work with your existing system, not a mandatory brand swap. We carry or can source what we need locally, and we stand behind every one of them with the same 90-Day Done Right Promise. We never push a brand because it pads the ticket. We install what actually survives Van Nuys conditions.
Common Gate Installation Problems We See in Van Nuys Homes
- Heat-burned operators on multi-unit properties. Van Nuys routinely hits 105 to 115 degrees in July and August, and the motor windings inside gate operators burn out far faster than manufacturer ratings assume. On doors and gates that cycle 50 times a day on a 24-unit apartment building, an operator that should last a decade might fail in four years.
- Corroded bottom rollers and rack wear on slide gates. Salt air from the coast, even 20 miles inland, accelerates corrosion on exposed steel components. The roller carriers on Van Nuys apartment slide gates are often the first thing to fail, and stripped rack teeth from decades of uneven loading kill the motor shortly after.
- Shifted posts in dry, compacted soil. Van Nuys soil dries out hard in summer and can shift concrete pier footings over time. A post that moves even a quarter inch changes the gate’s swing arc, puts load on the hinge, and eventually the frame sags. New installations need deeper footings and better drainage than inland specs call for.
- Santa Ana wind damage on broad swing gates. When wind funnels through Valley corridors like Victory Boulevard and Nordhoff, a closed, unbraced swing gate can catch enough force to bend the drive arm or snap the post. We design for that wind loading on every new gate we install in this corridor.
Pricing for Gate Installation in Van Nuys, CA
Here’s what you can expect to pay in Van Nuys right now, based on the work we’ve done this year across the 91601, 91604, 90046, and 91352 ZIP codes:
| Gate Type | Typical Van Nuys Price Range |
|---|---|
| Manual single swing gate, steel | $1,400 - $2,600 |
| Automated single swing gate, with operator | $2,200 - $4,500 |
| Sliding gate, steel frame, manual | $1,600 - $3,400 |
| Automated sliding gate, with opener and safety | $3,200 - $7,500 |
| Double driveway gate, automated | $3,800 - $8,000+ |
| Pedestrian gate, manual or mag lock | $900 - $2,200 |
| Security gate with access control | $3,500 - $9,000+ |
Cost depends on the gate width, post condition, operator brand and horsepower, and whether the install includes new access control wiring or re-welding an existing steel frame. What it doesn’t depend on is the mood of the crew on the day. We give you a firm written price before work starts, and we honor it. We offer $40 off any repair over $200, and a free second opinion if you’ve got a written estimate from another company and want it checked before you commit. Seniors and veterans get a permanent 10% discount. Call (350) 247-4763 for an exact quote, and we’ll schedule a free measure.
We Also Serve Cities Near Van Nuys
Our Van Nuys customers come from every corner of the neighborhood, but if you live just outside the city line, we cover you too. We install gates in Sherman Oaks, Panorama City, North Hollywood, and Encino on a regular schedule. The same owner-operated crew, the same written price promise, no trip charge if you’re inside the county, and the same 90-Day Done Right Promise on every job.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Van Nuys
The short answer is that gates in Van Nuys corrode faster than you’d expect for a neighborhood 20 miles from the water. Salt-laden marine air that works its way up the San Fernando Valley through the mountain passes settles on exposed steel hinges, posts, and welds. Zinc-plated hardware that holds up fine in Burbank will be pitted and rust-stained within two or three seasons here. For new installations in Van Nuys, we use stainless steel hinges, hot-dipped galvanized post caps, and either galvanized or properly primed painted steel frames. It costs a little more up front, and it’s the only thing that actually survives on properties near the 405 corridor. Call (350) 247-4763 and we’ll spec the hardware for your exact location rather than selling you a gate that starts rusting before the warranty is out.
Almost always, the bottom rollers and the operator board, in that order. The original slide gates on Van Nuys apartment complexes from the 1970s through 1990s sit on ground-mounted roller tracks. The rollers corrode, the bearings seize, and the drag increases until the motor is working twice as hard as it was rated for. Then the control board overheats, particularly during summer, and the whole system dies. On a Raymer complex off Van Nuys Boulevard, our crew recently replaced an original early-1990s DoorKing 9100-series unit that had been running on a cracked, heat-damaged control board patched with jumper wires for years. The rack and pinion showed stripped teeth from decades of uneven loading. That’s the typical picture here, but the good news is that once the board and rollers are replaced and the post footings re-set, the gate usually has another 20 years in it. Call (350) 247-4763 for a free estimate if your property’s gate is running slower than it used to.
Because Van Nuys runs hotter and the gates cycle harder than the manufacturer’s test conditions assume. Summer high temperatures of 105 to 115 degrees are routine in the San Fernando Valley, and that’s 15 to 20 degrees above coastal Los Angeles. Motor windings are insulated to a thermal limit, and every degree above that rating shortens the winding life, sometimes dramatically. Add in the reality of Van Nuys’s multi-tenant rental corridors, where a single shared gate might open 50, 60, or 80 times a day, and the thermal stress is compounded. The fix isn’t a magic brand. It’s sizing the operator for the real duty cycle and installing a board with proper thermal protection, which is what we do on every new install we put in here. For a quote on a heat-rated replacement, call (350) 247-4763.
Yes. Any automated gate installed in Van Nuys is subject to the same state and federal entrapment protection standards as the rest of California, and the Van Nuys rental market makes compliance non-negotiable. A shared driveway gate on a 24-unit building means children, delivery drivers, and elderly tenants every day, and the liability of a gate without properly wired photo eyes, safety edges, and entrapment sensors is enormous. We install UL 325-compliant systems on every automated gate we put in, whether it’s a single-family swing gate or a multi-tenant sliding gate. The wiring and sensors aren’t optional add-ons, they’re part of the price we give you up front. Call (350) 247-4763 and we’ll walk you through exactly what’s required for your property type.
Santa Ana winds are the single biggest seasonal cause of slide gate failures we see on the Victory Boulevard corridor. The winds funnel through the Valley from the northeast, and a long, unbraced slide gate acts like a wing. A gate that hasn’t been properly stopped can get blown off its track entirely, bending the drive gear and cracking the post footing in the process. The failures spike every autumn. When we install a slide gate in Van Nuys, we set the end stops to take the full static load of the gate plus wind, and we anchor the track deeper than standard. After a wind event, if your gate is binding or off its track, we’ll come out and make it right, and the 90-Day Done Right Promise applies. Call (350) 247-4763 and we’ll get it back on the track safely.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Van Nuys since 2001.