Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterPedestrian Gate Services in Encino, CA
If your pedestrian gate in Encino is dragging, sticking, or failing to latch, you likely need a professional adjustment or a hardware replacement rather than a total tear-out. A pedestrian gate that doesn’t close securely is more than a nuisance; it’s a security risk for your home. At Gatewood Fence & Gate, we specialize in getting these smaller, high-traffic gates working smoothly again, often by welding hinges or reinforcing the gate frame right in your driveway. If you are ready for a professional assessment, call us today at (350) 247-4763 for a free estimate.
I have been handling gate repairs in the San Fernando Valley since 2001, and I have seen how the local climate in Encino-specifically our hot, dry summers-can warp wood and stress metal hardware over time. Whether you have a custom wrought iron entry gate near the Ventura Boulevard corridor or a simple side-yard access point in a neighborhood like Amestoy Estates, I make sure the job is done right. We handle everything from basic latch adjustments to complex access control integration for your pedestrian entry. For larger projects, you can also view our full Gate Installation in Encino services.
When You Need Pedestrian Gate Service
Most homeowners wait until a gate stops working entirely before calling, but there are usually signs that your gate needs attention well before it fails to latch. If you notice these issues, it is time to address them before they turn into a bigger headache:
- Dragging on the walkway: If you see a clear arc scraped into your concrete or pavers, the hinge post is likely settling. This is common in Encino’s older neighborhoods where soil shifts after heavy winter rains.
- Latch misalignment: When the latch and the strike plate no longer line up, your gate won’t stay shut. This is often caused by a sagging gate frame rather than a faulty latch.
- Squeaking or grinding hinges: Metal-on-metal noise is a sign that the bearings are shot or lubrication has long since dried up. We can often replace hinge hardware on-site without removing the entire gate.
- Rusted or broken welds: If a cross-brace has snapped or a hinge is pulling away from the post, it needs immediate welding. We bring the welding equipment to your driveway so we don’t have to haul your gate away.
- Access control failure: If you use an electronic strike or keypad for your pedestrian entry and it’s unresponsive, it could be a wiring fault or a bad solenoid rather than a gate problem.
- Post leaning: If the post itself is leaning, the gate will never hang straight. We can reinforce these posts or, if necessary, reset them so they are plumb and secure.
Our Pedestrian Gate Process
When you call Gatewood Fence & Gate, you aren’t getting a dispatch queue or a chatbot. You are getting my process, which I have refined over 29 years of owner-operated service. I believe in fixing the problem, not just patching it.
- On-Site Assessment: I come to your property in Encino to look at the gate in person. I check the gate frame, the post integrity, and the hardware. A gate sags in the hinge post, not in the middle, and that is where I start my investigation.
- Upfront Diagnosis: I explain exactly what is wrong. If a hinge is failing, I will show you why. We don’t believe in guessing or replacing parts that still have life in them.
- Repair-First Approach: My goal is to save your existing gate. If the metal is solid, we weld, reinforce, or replace specific components like hinges or latches. I bring my welding rig to your driveway so your gate stays on your property.
- Hardware Quality Check: We work with reliable brands like Viking, DoorKing, and Elite. We ensure the hardware we install is rated for the weight and usage frequency of your specific gate.
- The 90-Day Done Right Promise: Once the work is complete, I stand behind it. If it’s not done right, I make it right. That is my promise to you, and it’s written on every invoice.
Pedestrian Gate Pricing in Encino
Pricing for pedestrian gate work depends on the complexity of the repair or installation. We provide no-hassle upfront pricing so you know what you are paying before we start. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. There is no trip charge inside the county.
| Service Type | Estimated Cost Range |
|---|---|
| Latch & Hinge Adjustment | $150 - $250 |
| On-Site Welding Repair | $250 - $450 |
| Pedestrian Gate Post Reset | $400 - $750 |
| Complete Hardware Replacement | $300 - $600 |
If you have a written estimate from another company, I am happy to provide a free second opinion. Often, I find that what others call a “total replacement” is just a repair that they don’t have the welding skills or patience to perform. Call (350) 247-4763 today for a free estimate.
FAQs - Pedestrian Gate
How much does it cost to fix a sagging pedestrian gate in Encino?
Fixing a sagging gate usually costs between $200 and $450, depending on whether the issue is simple hinge adjustment or requires welding reinforcement to the frame. The exact price depends on the gate material and the level of post-settling we find upon inspection. Call (350) 247-4763 for an exact quote - estimates are free.
Is it cheaper to repair a pedestrian gate or replace it?
It is almost always cheaper to repair a gate, provided the frame itself hasn’t suffered catastrophic rot or rust damage. We take a repair-first philosophy because we know that a well-built gate can last for decades with the right maintenance. If I can fix it for less than the cost of a new installation, I will tell you.
Can you match my existing gate style?
If we are installing a new Driveway Gate or pedestrian gate or a new section, we can match your existing aesthetic, whether it’s ornamental iron, chain link, or custom wood. We aren’t a big-box store with a catalog of three options; we are fabricators who can match what you already have. Call (350) 247-4763 to discuss your design needs.
Do you service electronic locks on pedestrian gates?
Yes, we service and install access control systems for pedestrian gates, including brands like Ghost Controls and Elite. If your keypad is dead or the electronic strike isn’t engaging, I can troubleshoot the electrical components to get you back in. Call (350) 247-4763 to schedule a service visit.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Encino.