Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Access Control in Encino: What to Know First
Ghost Controls gate access control repair in Encino is work we do every week, as an independent service provider - not a factory rep, but a shop that’s been fixing these openers in the San Fernando Valley since 2001. Most Ghost Controls access issues we see are fixed in one visit, and while we’re not one of those companies guessing over the phone, we’ll tell you straight what the likely problem is before we even roll up. If your keypad’s dead, your remote stopped talking to the board, or your phone entry quit right after a power flicker, call us at (350) 247-4763 - Hal Gatewood answers, day or night.
This page is for Encino homeowners who already have Ghost Controls hardware on a driveway gate and want it working again without waiting two weeks or paying for a whole new system. We work on Ghost Controls keypads, remotes, receivers, phone entry units, card readers, video intercoms, and the smart access gear the company ships now. If you’re reading this because a gate installer you can’t reach anymore installed the system, keep reading.
How Ghost Controls Products Fail - and How We Fix Them
- AXDP and HYDP series keypads go blank after a power event. Ghost Controls keypads are decent units, but the boards don’t handle voltage spikes well. A brownout on a hot Encino afternoon when every AC on the block is running full tilt can scramble the keypad memory. We see the keypad lit but unresponsive, or codes wiped entirely. Fix is usually a reprogram and a surge check at the transformer, not a new keypad.
- R/TX series remotes lose range gradually, then quit. Owners call thinking the remote’s dead, but what actually happens on Ghost Controls receivers is slow drift in the antenna connection inside the control box. The receiver’s still listening, just with one ear plugged. We resolder or replace the antenna lead, re-pair the remotes, and range comes back. Cheaper than a new receiver board, and the remotes stay paired.
- The keypad works, the remote works, then the whole gate goes dumb at 2 p.m. Heat-related failure on the control board’s voltage regulator is a pattern we’ve seen on several Ghost Controls systems in Encino, especially boxes mounted on unshaded metal posts. The board’s fine in the morning, dead by midafternoon, fine again after sunset. We relocate the box to shade or add a shield and replace the regulator. If someone tells you the board’s shot and sells you a whole new opener, call us for a second opinion.
- Phone entry units that drop the call when the gate’s mid-swing. On Ghost Controls systems tied into phone entry, the relay that triggers the open cycle sometimes chatters when line voltage to the gate post sags. The call connects, the gate starts, then everything resets. We trace the relay wiring, tighten the ground bond at the post, and replace the relay if it’s burned. It’s a forty-minute fix most trips.
- Aftermarket parts other companies stuffed in during a prior repair. We find non-OEM Ghost Controls replacement boards that were never flashed for the right gate weight. The gate opens fine, slams on close, trips the safety, and the owner assumes the motor’s going. It’s not the motor - it’s the aftermarket board running the wrong close cycle. We source proper Ghost Controls boards or quality aftermarket parts that match the batch and reflashed to factory spec, then run the full travel calibration.
Our Ghost Controls Gate Access Control Process
- 1
You call, Hal answers. We talk through the symptom - no keypad, no remote, no phone entry - and tell you whether it’s something we can likely fix in one visit or something worth quoting over the phone first. You get a real answer, not a script.
- 2
We come to your Encino driveway. No hauling the gate away. We open the control box, test the keypad, remotes, receivers, and safety edges, and figure out which Ghost Controls component actually failed. Not which one we’d like to sell you.
- 3
We tell you the fix, the price, and the part. If the OEM part makes sense, we use it. If a quality aftermarket part does the same job for less, we say that too. You approve the number before a single screw comes out. No surprises at the door.
- 4
We do the work on site. That includes re-soldering wiring where it needs it, replacing boards or remotes, reprogramming keypad codes, and resetting travel limits so the gate runs smooth, not slam-bam.
- 5
We test it with you. You run the keypad, the remote, the phone entry. You watch the gate open and close. You tell us it’s right before we leave.
- 6
You get the 90-Day Done Right Promise in writing. If something’s not right after we leave, one call brings Hal back. No runaround, no voicemail.
What Ghost Controls Gate Access Control Costs in Encino
Most Ghost Controls access control repairs in Encino land between $145 and $385, depending on what actually failed. That covers the diagnosis, the part, the labor, and the test cycle in your driveway. Here’s what that looks like:
- Keypad reprogram or relay fix: $145-$195
- Remote pairing or antenna repair: $95-$165
- Receiver board replacement: $210-$340
- Phone entry or video intercom repair: $225-$385
- Full keypad and receiver replacement: $310-$475
What moves the price is whether the failed Ghost Controls part is repairable or needs replacing, and whether a previous installer left damaged wiring for us to un-do. We quote and you approve before any work starts. Call (350) 247-4763 for a free estimate - and if you already have a written estimate from another company, we’ll give you a free second opinion on it.
Why Encino Homeowners Call Gatewood Fence & Gate for Ghost Controls Work
Hal Gatewood has been fixing gates in the San Fernando Valley since 2001, and most of that time’s been spent right here in Encino. He grew up two blocks from Balboa Park and picked up his welding and fabrication training at Los Angeles Pierce College over in Woodland Hills, and that means the person showing up knows gates the way a mechanic knows engines - not just which button to press, but why the whole system works or doesn’t. The 90-Day Done Right Promise is stamped in writing on every job. A live person answers the phone 24/7, not a voicemail or a call center three states away. And because we service LiftMaster, Mighty Mule, and DoorKing alongside Ghost Controls, we’re not brand-blind - if your system’s mixed and matched from a prior install, we’ll sort that too. We’re not authorized by Ghost Controls; we’re better than that, we’re independent, and we tell you what the part actually needs.
FAQs
Ghost Controls warranty terms cover the part from date of purchase when bought through authorized channels, but the labor to remove, test, and reinstall is on the owner. We handle warranty part swaps as an independent Ghost Controls service provider - we tell you upfront what’s covered and what isn’t, and you approve everything before we start. Call (350) 247-4763 and we’ll look up your warranty status while you’re on the phone.
Most Ghost Controls access control parts - keypads, receivers, remotes, safety edges - are available to us same-week in southern California, and we stock the most common failure parts on the truck. If a board’s backordered from the factory, we’ll tell you before you spend a dime and offer a repair path or a quality aftermarket part that we can flash to match. Estimates are free, and you’ll know the timeline before we order anything.
If the motor arm and gearbox are sound, repair usually wins. We fix plenty of Ghost Controls boards and keypads on systems that still have years left in them. If the gearbox is grinding and the board’s shot and the keypad’s dead, we’ll tell you repair money’s better spent on new hardware - and then we’ll quote you the replacement honestly. Just call me - if I can’t fix it, I’ll tell you straight and we’ll figure out what makes sense.
Call (350) 247-4763 and we’ll tell you the soonest we can be there, which is often the same day depending on where in Encino you are and what’s failed. Hal answers the phone himself, so you’ll get a straight answer, not a promise someone else has to keep. No trip charge inside the county, and the diagnostic’s part of the quote.
Yes - that’s most of what we do. We see plenty of Ghost Controls systems in Encino that another contractor put in, then walked away from when the first relay failed. We’ll rework it, stand behind it with the 90-Day Done Right Promise, and you’ll leave with a phone number that answers.
Need Ghost Controls Gate Access Control in Encino? Call Now
If your Ghost Controls keypad’s dead, your remote’s lost its range, or your phone entry’s acting up, call Gatewood Fence & Gate at (350) 247-4763. Hal answers the phone day or night, gives you a straight answer, and shows up when he says he will. You’ll get a free estimate before any work starts, and the 90-Day Done Right Promise in writing when the job’s done. Serving Encino, Tarzana, Sherman Oaks, Woodland Hills, and the whole San Fernando Valley since 2001. The name’s on the shop, and the shop’s down the road.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Encino and nearby areas.