Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Beverly Hills, CA
When an estate gate stops opening on Canon Drive or a swing arm begins grinding in Trousdale Estates, the repair can’t wait for a call center to route you to somebody three counties away. Gatewood Fence & Gate answers the phone with a live person 24 hours a day, and the person who shows up is accountable by name. We’ve been repairing and welding gates since 2001, and we understand the particular demands of Beverly Hills properties better than most. If you need gate repair in Beverly Hills, call (350) 247-4763 for a straight answer and a straight quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Beverly Hills Homeowners Choose Gatewood Fence & Gate
Beverly Hills is not a place where a generic gate repair company survives long. The homes here run on commercial-grade automation: Viking and DoorKing operators on flat-rated tracks, telephone entry systems tied to estate staff, swing arms that carry two-thousand-pound wrought iron panels. When those break, the owners want a name they can verify and a person who will come back if something isn’t right. Hal Gatewood runs the shop himself, publishes his address and license number, and has been welding on site since 2001. The 90-Day Done Right Promise is printed on every job, plain as day. If it’s not done right, one call brings Hal back. That’s the whole promise.
We serve the residential flats from the 1930s and 1940s, the hillside properties above Coldwater, and the estate lots throughout Trousdale Estates and West Hollywood, CA. The calls vary from a failed capacitor on a LiftMaster to a complete re-hanging after a masonry post cracked from decades of irrigation. One thing doesn’t vary: the person who answers your call knows Beverly Hills and won’t waste your afternoon.
Key Takeaways for Gate Repair in Beverly Hills
- Gate repair in Beverly Hills typically runs $175-$450 for common mechanical and electrical fixes; full operator replacement starts around $1,200 and climbs depending on brand and access control.
- The marine layer and Santa Ana winds here accelerate hardware wear, especially on exposed hinges, rack gear, and gearboxes.
- Repair-first is standard practice at Gatewood. If a part can be welded back to service rather than replaced, that’s what we recommend.
- Every quote is agreed before any work starts. There’s no surprise on the invoice.
- We are owner-operated with a published address, a live-answer phone, and a 90-Day Done Right Promise in writing.
Gate Repair Services We Offer in Beverly Hills
Most of our work in Beverly Hills falls into five buckets: gate repair, gate installation, gate motor and opener service, gate access control, and gate parts and welding. Each pulls on a different set of skills, and each has its own failure patterns in this city. Here’s what we actually do.
Gate Repair
A sagging gate is rarely the panel’s fault. In Beverly Hills, the usual culprits are cracked hinge posts, worn hinge bearings, rack gear with missing teeth, or a grade change that shifted the whole frame. We repair the gate where it sits, in your driveway, with on-site welding and no tow-away drama.
Learn more about our Gate Repair in Beverly Hills.
Gate Installation
Some Beverly Hills properties are ready for a new gate because the old one was never right for the driveway grade. Others want a bespoke wrought iron panel to match a 1940s Spanish Colonial aesthetic. We measure, build, and install with anchors and posts sized for the soil, not just for the panel. Learn more about Gate Installation in Beverly Hills.
Gate Motor & Opener
We service and replace operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The most common service call in Trousale Estates is an operator condemned by another outfit when the actual fault was an anti-rollback brake on a flat-rated motor that should never have been installed on an inclined track. Learn more about Gate Motor & Opener in Beverly Hills.
Gate Access Control
Telephone entry, keypads, card readers, video intercom, vehicle loop detectors, and integration with estate security systems. We coordinate with estate managers so the gate works for the people who are supposed to be there and not for the people who aren’t.
Gate Parts & Welding
We stock common parts for the brands above and weld on site for hinges, rack gear, panels, posts, and frames. If a weld can outlast the replacement part, we’ll tell you. Hal’s workshop is set up for exactly that kind of repair.
Neighborhoods We Serve in Beverly Hills
Our trucks are in Beverly Hills every week. Typical response for a broken gate is same-day when the call comes in before mid-afternoon, and always within one business day for non-emergency service. We regularly work in:
- Trousdale Estates
- The Beverly Hills Flats
- Beverly Hills Post Office (90010)
- Westwood
- Benedict Canyon
If you’d like, first read about our broader approach on our home page.
Why Beverly Hills’s Climate & Housing Affect Gate Repair
Beverly Hills sits roughly five to seven miles from the Pacific, and the nightly marine layer settles on metal gate hardware in a way it simply doesn’t in the Valley or Pasadena. Hinges, rollers, rack gear, and gearboxes corrode faster here. We see rust on gate frames that are only eight years old. Then, in the fall, Santa Ana winds kick debris into slide tracks and stress swing arm operators long after the wind dies down. The result is a predictable spike in service calls for motor burnout and track deformation every autumn.
The housing stock adds its own layer. The residential flats hold 1930s through 1960s Spanish Colonial, Tudor, and traditional estates whose original masonry gate posts and pilasters are now frequently cracked or heaved by decades of irrigation and root intrusion. That means a “motor problem” is often a post problem in disguise. Fix the panel without the post and you’ll fix it twice. Trousdale Estates, the hillside mid-century modern enclave built out between 1955 and 1975, adds steep driveway grades that place unusual mechanical load on slide gate operators and anti-rollback systems. A gate sags in the hinge post, not in the middle, and that’s where we start.
Pricing for Gate Repair in Beverly Hills
We quote every job before any work begins. The price you agree to is the price you pay. Here’s what Beverly Hills gate repair typically costs:
- Diagnostic service call (no trip charge inside the county): $0
- Minor electrical repair (capacitor, limit switch, photo eye): $175-$325
- Hinge or bracket replacement with welding: $250-$600 depending on access and weight
- Slide gate track repair or replacement section: $400-$1,000
- Operator replacement (standard swing or slide motor): $1,200-$3,800 installed, depending on brand and control features
- Access control addition (keypad, card reader, or telephone entry): $600-$2,500 installed
- Full bespoke gate build and installation: $12,000-$80,000+, depending on material, size, and engineering
We also run standing offers that don’t require haggling: $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (350) 247-4763 for an exact quote; estimates are free.
What to Look For in a Beverly Hills Gate Repair Company
Before you hire anyone, compare what you’re being told against what you can actually verify. That’s the same test a Beverly Hills homeowner applies to every contractor who walks the property.
Do they have a published address and a real license number?
Hal Gatewood’s name is on the shop, his address is published, and his license number can be looked up in under a minute. If a gate company hides behind a website form and a chat widget, that’s your answer.
Will they repair or will they swap?
Nationals and high-volume shops make margin on parts replacement, not on doing the slow thing right. Hal fixes the gate in your driveway rather than hauling it off or replacing parts that don’t need replacing. That’s been the approach since 2001, and it’s why the repair-first language is in the company’s bones, not just on the website.
What happens if the fix doesn’t hold?
Here’s our answer, in writing: if it’s not done right, we make it right. The 90-Day Done Right Promise is stamped on every job, not buried in fine print. That’s the only way it should ever be done in a city like Beverly Hills, where the gates themselves represent serious investment.
Service Area - Cities Near Beverly Hills
We handle Beverly Hills proper and the surrounding area. If you’re also looking for gate work in West Hollywood, Sherman Oaks, Santa Monica, or North Hollywood, the same live-answer phone and repair-first approach apply.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Beverly Hills
Most gate repairs in Beverly Hills cost between $175 and $600. Minor electrical fixes run at the lower end, while welding repairs and track work run higher. Full operator replacement typically starts around $1,200. Every quote is fixed before work starts. Call (350) 247-4763 with the gate’s symptoms and we’ll give you a real number.
Yes, in most cases. We’re in Trousdale regularly, and same-day service is available when you call before mid-afternoon on a weekday. After-hours and weekend calls go to a live person, not a voicemail. Tell us the gate’s behavior and we’ll give you an honest answer about when we can be there.
We do. Gate installation on estate properties means the whole system: power run, conduit, safety edges, photo eyes, operator mounting, and access control wiring. We do not hand you a gate and tell you to call an electrician. One crew, one quote, one point of contact.
Yes. We service Viking, DoorKing, FAAC, BFT, Linear, LiftMaster, Elite, Ghost Controls, and Mighty Mule. On Beverly Hills hillside lots, a grinding Viking often means a stripped gear or a worn anti-rollback brake; we diagnose before we condemn. Call (350) 247-4763 and describe the noise, and Hal will tell you what’s likely wrong.
We’re owner-operated and locally based, with scheduling and dispatch coordinated from our Los Angeles office. Crews serve Beverly Hills directly, week in and week out, and a live person answers every call around the clock. Hal’s name is on the shop, and the shop is down the road; that’s the oldest accountability there is.
Contact Gatewood Fence & Gate
If you need gate repair in Beverly Hills, call (350) 247-4763 now for a straight diagnosis and a fixed quote. Or drive to the shop and look Hal in the eye. Whichever you prefer, you’ll get the same answer on the phone and in person: honest pricing, repair before replacement, and a 90-day promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Beverly Hills residents with honest gate repair since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg