Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in San Fernando, CA
When an iron gate starts dragging across the driveway or a motor grinds and dies at 6 a.m., nobody in San Fernando wants to wait through a call center queue. Most gate failures in this city trace back to two things: decades-old welded frames that have settled with the ground, and earthquake-stressed hinge posts that lean just enough to throw everything out of alignment. If that sounds like your gate this week, call (350) 247-4763 and you’ll get a live person on the line, not a voicemail. Hal Gatewood has been fixing gates since 2001, and the person who answers the phone is the same person who stands behind the work.
We serve the whole city of San Fernando, from the quiet streets north of San Fernando Road down to the blocks around Cesar E. Chavez Learning Academies, and we’re usually at the gate within hours for repair calls.
Key Takeaways
- Gate repair in San Fernando typically runs $135 to $485 depending on hinge, welding, and opener work.
- San Fernando requires city permits for gate replacements, not LA City permits, and we handle that correctly.
- Most older ornamental iron gates here need hinge rebuilding and weld restoration, not replacement.
- Every repair carries our 90-Day Done Right Promise in writing.
- Call (350) 247-4763 for a free estimate. A live person answers, 24/7.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why San Fernando Homeowners Choose Gatewood Fence & Gate
Hal Gatewood’s name is on the shop and on every invoice. That matters in a city like San Fernando, which runs only about 2.4 square miles and has its own municipal code enforcement. When a gate repair requires a permit or a specific repair method to satisfy city inspectors, you want the person doing the work to know the difference between San Fernando inspection requirements and the neighboring LA City rules. We do, because we’re in this city’s neighborhoods every week.
Residents in the blocks around Pioneer Park and along Maclay Avenue call us because they’ve already tried the national brands that quote one number on the phone and show up with another. Hal is owner-operated, lives with the same heat, wind, and quake history as every other San Fernando homeowner, and he fixes the gate in your driveway rather than hauling it off and selling you a new one. On-site welding is a core part of how we work, not an add-on. When we say we’ll be there Tuesday at 9, that’s Hal or a member of his crew, uniformed and background-checked, arriving in that window.
We also answer the phone with a live person around the clock. Not a call tree, not a bot, not someone three states away reading a script.
Gate Repair Services We Offer in San Fernando
Gate Repair
The most common repair we do in San Fernando is a sagging swing gate whose hinge post has shifted. A gate sags in the hinge post, not in the middle, and that is where we start. We weld on site, replace pins and hinges, straighten frames, and reinforce rusted bottom rails so the latch lines up again.
Learn more about our Gate Repair in San Fernando.
Gate Installation
New gate installations in San Fernando require a city permit from the San Fernando municipal building office, not from the City of Los Angeles. We handle that step, measure the opening to account for the valley’s thermal swings, and install a gate that’s square on day one and stays that way. From a simple side-yard gate to a full driveway replacement, the work is measured, ordered, and scheduled, with a written price before anything starts.
Learn more about our Gate Installation in San Fernando.
Gate Motor & Opener
Santa Ana winds in the fall push hard against automated swing gates across the valley, and that repeated stress shows up in burned motors, stripped gears, and loosened operator mounts. We service, repair, and replace motors and openers from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we program remotes and safety edges on site.
Learn more about our Gate Motor & Opener in San Fernando.
Gate Access Control
For San Fernando homeowners with multiple access points on one parcel, access control is about more than opening a gate. We install and repair keypads, intercoms, vehicle sensors, and phone-based entry systems, and we make sure the system obeys city setback rules and works with your existing gate hardware rather than against it. A keypad that works on a cold February morning and a 105-degree July afternoon is the standard.
Learn more about Gate Access Control - San Fernando.
Gate Parts & Welding
A cracked weld is the most common reason an older ornamental iron gate finally gives up. San Fernando has an unusually high number of custom-welded wrought iron gates from the 1970s and 1980s, and many of them carry real sentimental value to the families who have lived behind them for decades. We handle weld restoration, hinge rebuilding, rust treatment, and replacement of specific hardware components so the gate you love keeps swinging.
Learn more about our home services and approach.
Neighborhoods We Serve in San Fernando
San Fernando is only 2.4 square miles, but it has distinct pockets. We’re regularly on gates near Pioneer Park, around the residential blocks north of San Fernando Road, in the neighborhoods surrounding Cesar E. Chavez Learning Academies, along Maclay Avenue, in the older enclaves near the downtown district off First Street, and in nearby Granada Hills, CA. Typical response time for a repair call anywhere in the city is same day or next morning, and emergency calls are often faster.
- Pioneer Park area
- Maclay Avenue corridor
- North San Fernando Road neighborhoods
- Downtown San Fernando district
- Blocks near Cesar E. Chavez Learning Academies
Why San Fernando’s Climate & Housing Affect Gate Repair
Sitting deep in the inland valley, San Fernando regularly pushes past 100°F in summer. That heat expands steel and iron gate frames, and if a gate was installed without enough clearance or with hinges that were already marginal, the frame binds against the post and the latch stops landing. We see a spike in heat-related repair calls every July and August, and the fix usually involves hinge shimming, post straightening, or frame adjustment, not a new gate.
There’s also the earthquake history to account for. A meaningful share of the masonry gate posts in San Fernando have footings that were compromised during the 1971 Sylmar quake, whose epicenter sat just north of the city, and again during the 1994 Northridge quake. That post-lean is chronic. You can fix the panel without the post and it will sag again within a couple of years. We address the post first, then the gate.
Housing stock here also matters. Many San Fernando homes are post-WWII single-family houses built in the 1940s through the 1960s on compact lots, and many have been expanded over the decades with block-wall enclosures and secondary units. That means multiple gates per parcel, often a driveway gate, a side-yard gate, and a rear access gate, each with its own hardware and wear pattern. Older custom-wrought iron gates from the 70s and 80s are common and worth repairing. Show me a gate closing on its own and I’ll show you where it’s failing, and in this city, the failure is usually a tired hinge post or a cracked weld, not a gate that should be scrapped.
Pricing for Gate Repair in San Fernando
Every San Fernando job gets an upfront price, quoted and agreed before any work starts. The price you get at the start is the price you pay at the end. Here’s what typical repairs in this city run:
- Hinge and pin replacement: $135-$320
- Weld repair on iron gate frames or posts: $85-$240 per weld location
- Sag correction with post straightening: $260-$485
- Gate opener motor replacement (parts and labor): $395-$1,100 depending on brand and horsepower
- Full service call for diagnosis and small adjustment: $95-$185
We also have standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. These offers stand, plain and simple.
Service Area - Cities Near San Fernando
If you live just outside San Fernando city limits, we work in Sylmar, Granada Hills, Panorama City, and Northridge as well. The same crew, the same warranty, and the same live-answer phone line.
Serving San Fernando, CA - Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in San Fernando
Most gate repairs in San Fernando run between $135 and $485 depending on whether the job is hinge replacement, weld restoration, or post straightening. Opener motor replacements run higher because the motor itself is a purchased part. You’ll get an exact quote before anything starts, and the $40-off-any-repair-over-$200 offer applies every day. Call (350) 247-4763 for a free estimate.
Most repairs do not require a permit, but a full gate replacement or a new installation does require a permit from San Fernando’s municipal building office, not from the City of LA. This is the single most common point of confusion we see, and outside contractors frequently get it wrong. We handle the permit step correctly the first time.
In most cases, yes. Repair calls in San Fernando are typically same day or next morning, and we carry common hinge, pin, and hardware stock to handle the most frequent failures right away. When the repair involves custom parts or a specific opener model, we’ll tell you that on the phone before scheduling.
Because the problem is usually the hinge post, not the panel. In San Fernando, many original masonry gate posts have footings damaged by the 1971 Sylmar or 1994 Northridge earthquakes, and they lean slightly even after the gate itself is straightened. If the post isn’t addressed, the sag returns. We treat the post first, and the 90-Day Done Right Promise covers the work in writing.
We repair older custom iron gates, and that’s the majority of our San Fernando work. Many of the wrought iron gates in this city were custom-welded by local tradespeople in the 70s and 80s, and they’re worth keeping. Hal welds on site, rebuilds hinges, treats rust, and restores what’s there rather than pushing a replacement. It’s a repair-first shop. Call (350) 247-4763 and Hal will tell you honestly whether your gate is worth fixing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving San Fernando and the surrounding valley since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Fernando Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond