Automatic Gate Repair in Encino, CA

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Automatic Gate Repair in Encino, CA

If your automatic gate is stuck, grinding, or simply refusing to open when you pull into your driveway in Encino, we can help. How Much Does Gate Repair Cost? (2026 Price Guide) - Encino, CA: typically between $150 and $450 depending on whether the issue is a simple sensor misalignment, a worn-out logic board, or a mechanical failure in the motor. We provide same-day or next-day service to get your property secure again, and we always offer a free estimate before we turn a single wrench. If you need immediate assistance, call us at (350) 247-4763.

I’m Hal Gatewood, and I’ve been fixing gates since 2001. A lot of companies out here in the San Fernando Valley will show up, look at your gate, and tell you the whole system needs to be replaced. That is rarely the truth. Most of the time, it is a matter of adjusting the limit switches, cleaning out debris from the track, or repairing a connection that has vibrated loose over time. When you call Gatewood Fence & Gate, you get a technician who knows how to troubleshoot the electronics and the mechanics. We handle everything from basic Gate Repair in Encino to complex motor diagnostics for brands like Viking, DoorKing, and Elite. We are locally owned, we answer our own phones, and we stand by our work with our 90-Day Done Right Promise.

When You Need Automatic Gate Repair

You usually know something is wrong before the gate stops working entirely. In Encino, we deal with a lot of dust and heat that can wreak havoc on sensitive gate components. If you notice any of these signs, it is time to have someone take a look before the motor burns out completely, and Gate Realignment may be needed:

• The gate makes a grinding or scraping noise: This usually means the drive gear is worn or there is debris in the track. If you hear metal on metal, stop using the gate immediately to prevent stripping the gears, which turns a small repair into a motor replacement.
• The gate opens or closes only halfway: This is almost always an issue with your limit switches or a sensor obstruction. In the neighborhoods near Balboa Park, we often see spider webs or accumulated leaf debris blocking the photo-eyes, which tricks the system into thinking something is in the way.
• The remote or keypad is intermittent: If you have to stand right next to the gate to get it to open, your antenna connection or the receiver board might be failing. We can test the signal strength and replace the receiver without needing to swap out the entire opener unit.
• The gate moves slowly or struggles to start: This often points to a failing capacitor. In the heat of an Encino summer, capacitors work harder and fail more frequently. If your gate needs a “push” to get moving, the capacitor is likely the culprit.
• The gate won’t lock or hold shut: If the gate drifts open after it closes, the internal brake mechanism or the magnetic lock is failing. This is a security risk for your home, and we prioritize these calls to ensure your property remains secure.

Our Automatic Gate Repair Process

I don’t believe in “dispatching” someone who doesn’t know your name. When you call us, we are going to walk through the problem over the phone first. Here is how we handle Gate Repair services at your property:

1. The Initial Assessment: We arrive at your home and test the system through a full cycle. We watch how the gate sits in the hinge post-because a gate that sags will always put extra stress on the motor. We don’t just fix the symptom; we look for the cause.
2. Safety Check: Before we touch anything, we cut the power and secure the gate. High-tension springs and powerful motors can be dangerous if handled incorrectly. We ensure the area is safe for you and for us before we start the diagnostics.
3. Diagnostic Review: We open the motor housing and check the logic board, the capacitors, and the wiring connections. We use a multi-meter to see if the motor is actually receiving the correct voltage. Most of the time, the issue is a loose wire or a bad connection, not a broken motor.
4. On-Site Repair: We carry common parts for major brands like Viking and Elite in our truck. If we need to weld a bracket back into place or replace a worn drive chain, we do it right there in your driveway. We don’t haul your gate off to a shop unless it is absolutely necessary.
5. Final Testing and Guarantee: Once the repair is done, we run the gate through ten full cycles to ensure it is hitting its stops correctly and that the sensors are perfectly aligned. Every repair is backed by our 90-Day Done Right Promise-if it isn’t right, call us, and I will come back out to make it right.

Automatic Gate Repair Pricing in Encino

I know people get tired of hearing “it depends” when they ask for a price. While every gate is different, I can give you a realistic idea of what to expect based on our experience in the Encino market. We keep our pricing straightforward, and we offer a permanent 10% discount for seniors and veterans.

If you have a written estimate from another company, I am happy to provide a free second opinion. Often, we find that what they quoted as a “total replacement” is just a repairable part. We don’t charge a trip charge if you are in the county, and we take $40 off any repair bill over $200. Call (350) 247-4763 for an exact quote.

FAQs - Automatic Gate Repair

How do I know if my gate motor is actually broken or just stuck?

Usually, if the motor makes a humming sound but nothing moves, the motor is likely fine, and the issue is with the capacitor, the drive gear, or an obstruction. If the motor is dead silent when you press the button, check your power supply or the GFCI outlet first. Most of the time, it is a simple fix that doesn’t require a new motor, but it is best to have a professional check the Electric Gate Repair components to avoid a shock hazard.

Can you repair my gate if it’s a brand you don’t list?

We are certified to service nine major brands, including Ghost Controls, DoorKing, and Viking, but we have worked on just about everything installed in Encino over the last 29 years. If it is an older, obscure system, we will be honest with you about whether parts are still available before we ever start the work. We won’t waste your time or money on a system that cannot be fixed.

Is it cheaper to repair my gate or replace the whole system?

In almost every case, it is cheaper to repair. A new gate installation is a major investment, and most gate motors are built to be maintained, not thrown away. Unless the motor housing is cracked or the electronics are completely fried beyond repair, we can usually get your gate running smoothly for a fraction of the cost of a new unit. We focus on home service that saves you money.

Do you offer emergency service if my gate won’t close?

A gate that won’t close is a security risk, not just an inconvenience. We answer our phones 24/7, so if your gate is stuck open in the middle of the night, call us immediately at (350) 247-4763. We will do our best to get a technician to your property to secure the gate so you can sleep soundly.

We are ready to help you get your gate back in working order. Whether it is a simple adjustment or a complex electrical repair, we handle it with the care of a neighbor. Call us at (350) 247-4763 to schedule your free estimate today.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Encino.