Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Los Angeles?
Gate repair in Los Angeles typically costs between $150 and $450 for standard labor and parts, though major structural welding or operator replacement can range from $600 to $1,400 depending on the complexity of the gate system. Most homeowners in Los Angeles can expect to pay on the lower end of that spectrum for routine hinge adjustments, sensor alignment, or minor electrical troubleshooting. If you need an exact price for your specific setup, call us at (350) 247-4763 for a free estimate; we don’t believe in hidden fees or changing the price when we arrive at your door.
Gate Repair Cost Breakdown (2026)
When you live in a city like Los Angeles, your gate takes a beating from the coastal air, the heat, and the sheer volume of daily cycles. I have been fixing these systems since 2001, and I have seen every kind of failure imaginable. Below is a breakdown of what you can expect to pay for common repairs in the Los Angeles area this year.
| Repair Type | Estimated Cost Range |
|---|---|
| Hinge Welding & Re-alignment | $180 - $350 |
| Gate Sensor/Photo-Eye Alignment | $120 - $220 |
| Gate Opener/Motor Troubleshooting | $250 - $550 |
| Chain or Belt Drive Repair | $200 - $400 |
| Major Structural Welding (On-site) | $450 - $900 |
| Access Control/Keypad Replacement | $250 - $600 |
These numbers assume standard residential gate configurations. If your gate has been damaged by vehicle impact or if the post foundation has shifted significantly due to soil settling, the cost will lean toward the higher end. At Gatewood Fence & Gate, we provide upfront pricing. We do not use “trip charges” if you are inside the county, and I always offer a free second opinion if you have already received a written estimate from someone else.
What Affects Gate Repair Pricing in Los Angeles
The cost of your repair isn’t just about the parts; it is about the time required to do the job right the first time so you aren’t calling me back in a week.
- The Brand of the Motor: We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for older, legacy systems are sometimes harder to source, which can increase the repair time.
- Accessibility and Terrain: Los Angeles neighborhoods like the Hollywood Hills or the steep driveways in Silver Lake often make it difficult to get our welding truck into a position where we can safely work on your gate. If we have to haul equipment up a slope, it adds time to the job.
- Nature of the Damage: A gate that sags because the hinge post is pulling away from the concrete is a structural issue. We don’t just patch the weld; we address the post foundation. Fixing the panel without fixing the post is just a temporary patch, and I won’t put my name on that kind of work.
- Time of Day: While we answer the phone 24/7, emergency repairs that require us to be out at 2:00 AM to secure your property will naturally cost more than a scheduled repair during business hours.
- Safety Compliance: If your gate system is outdated and missing modern safety entrapment devices, we are required by code to bring those up to standard. It isn’t just an expense; it is a necessity for your family’s safety.
The Truth About “Cheap” Gate Repairs
I get calls every day from homeowners who hired someone off a classifieds site because they offered a “low-cost” fix. Two weeks later, the gate is dragging again, or the motor is making that grinding noise, and the person they hired won’t answer their phone.
A gate is a heavy, moving piece of machinery. If it isn’t balanced, the motor works twice as hard, and that is how you burn out a $700 component. When I show up, I look at the whole system. If your gate is dragging, I am not just going to adjust the chain tension and leave. I am going to find out why it is dragging. Usually, it is a hinge post that has shifted. If we don’t fix the root cause, you are just throwing money away. My name is on the shop, and the shop is down the road. That is the only accountability that matters in this business.
How to Save on Gate Repair
You don’t need a coupon to get a fair price from us. We run a straightforward shop, and we keep our overhead low so we can pass those savings on to you.
- Take Advantage of Standing Offers: We offer $40 off any repair over $200. This isn’t a “limited time” marketing gimmick; it is a permanent offer.
- Senior and Veteran Discounts: We provide a permanent 10% discount for all seniors and veterans. Just let me know when you call.
- Get a Second Opinion: If you have an estimate from another company that seems too high or feels like they are trying to upsell you on a full replacement when you only need a repair, call us. We offer free second opinions on any written estimate.
- Avoid the “Full Replacement” Trap: Many national companies are trained to sell you a new gate. We are repair specialists. If your gate can be welded or the operator can be salvaged, we will fix it. We keep our welding equipment on the truck so we can handle structural repairs right in your driveway.
Safety Warning: High-Tension Components
Please, do not attempt to adjust the tension springs or the main hinge assembly on your own if you are not trained. These systems are under significant mechanical tension. A gate falling off its track or a spring snapping can cause serious injury. If your gate is hanging by a single hinge or the chain has snapped, secure the area, keep children and pets away, and call us at (350) 247-4763. We can get out there to stabilize the system properly.
FAQs - Gate Repair Cost
How much does it cost to fix a sagging gate in Los Angeles?
Most sagging gate repairs in Los Angeles cost between $200 and $450. This price covers the on-site welding required to reinforce the hinges or the gate frame itself. If the post foundation has failed, the cost can be higher, but we will always give you a firm price before we strike an arc. Call (350) 247-4763 for a specific quote for your driveway.
Is it cheaper to repair or replace a gate motor?
It is almost always cheaper to repair a gate motor if the parts are still available. A repair typically runs $250 to $550, while a full replacement of the operator and access control system can cost $1,500 or more. We carry parts for all major brands like LiftMaster, Viking, and DoorKing, so we can usually get your existing motor running again.
Do you charge for estimates?
No, we do not charge for estimates. If you are in the county, there is no trip charge for us to come out and take a look at your gate. We want to be the people you call when you have a problem, not the people who charge you just to say hello. Call (350) 247-4763 to schedule a time.
Can you fix a gate that won’t close?
Yes, we see this constantly. It is usually a sensor alignment issue or a limit switch failure, which typically costs between $120 and $250 to resolve. If it is a mechanical obstruction, we will clear it and ensure the gate is balanced. Call us today so we can get your property secured.
Are your repairs guaranteed?
Every single job we do comes with our 90-Day Done Right Promise in writing. If we fix it and it isn’t working right within those 90 days, you call me, and I will come back out to make it right. No runaround, no excuses.
Get Your Gate Fixed Right
We have been serving Los Angeles since 2001, and we aren’t going anywhere. When you call (350) 247-4763, you are getting a live person who knows how these systems work. We don’t use dispatchers, and we don’t send out subcontractors who don’t know the first thing about welding. I show up, I look at the gate, and I tell you exactly what it will take to fix it. If you need a home gate repair, give us a call. We are ready to help.
Pricing reflects the Los Angeles market as of 2026. Gatewood Fence & Gate offers our Gate Repair services with free estimates - call (350) 247-4763. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Los Angeles since 2001.
What Our Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg