Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Reseda
A new gate installation in Reseda typically runs $2,600 to $9,500 for most residential jobs, depending on gate type, span, automation, and what’s already in the ground. We usually complete a standard single swing or slide gate within one to three days once materials are on hand, with custom or welded work taking a little longer. Hal Gatewood has been installing gates and offering Gate Repair - Reseda since 2001, and his crew knows Reseda’s tract homes, long driveways, and earthquake-shifted footings better than any outfit rolling in from outside. Call us at (350) 247-4763 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Reseda’s Preferred Gate Installation Company
We’re local. The shop is down the road, Hal’s name is on the invoice, and the person who measures your gate is the same person who’ll be back if anything isn’t right. Reseda homeowners call us because we show up in the window we promised and because our Gate Installation crew welds on site instead of hauling your gate to some off-site shop. That means you watch the work happen in your own driveway.
We carry a 90-Day Done Right Promise in writing on every job. If the gate binds, sags, or the operator misbehaves within three months, one call brings Hal back. No runaround, no “that’s normal settling.” We also answer the phone with a real person 24/7. Not a voicemail, not a queue. When a gate won’t close and your dog’s loose on Sherman Way, that matters.
Reseda customers also get a published address and license number to verify, background-checked crew members in uniform, and honest pricing: $40 off any repair over $200, no trip charge inside Los Angeles County, free second opinions on written estimates, and a permanent 10% discount for seniors and veterans.
Our Gate Installation Services in Reseda
Every install starts with the footings. In Reseda, that’s not boilerplate. A gate that sags in the hinge post, not in the middle, is almost always a footing problem. We break out bad concrete, repour it correctly, then set the gate. Here’s what we install most often in this neighborhood:
Driveway Gate Installation
Most Reseda driveways are single-width ranch entrances off Reseda Boulevard, Tampa Avenue, or the side streets in between. We install single and double swing gates, often with automation added. The typical driveway gate install in Reseda ranges from $2,800 to $7,200, including posts, hinges, gate, and standard operator wiring.
Pedestrian Gate Installation
Side-yard and walk-through gates on Reseda’s older tract homes were often built as chain-link or lightweight ornamental iron in the 1960s and 1970s. Those gates are 50 to 70 years old now. We build and install new welded steel pedestrian gates with your latch choice, keypad, or intercom. Most pedestrian gate installs run $900 to $2,600 depending on width, picket choice, and post condition.
Sliding Gate Installation
Sliding gates are the right answer for many Reseda properties, especially where long driveways feed back into detached garages and there isn’t room for a swing arc. A new powered slide gate on a fresh concrete track pad typically runs $4,500 to $9,500 in Reseda. The big cost drivers are the track length, the operator, and whether we’re repouring the existing cracked pad first. That last part is common here. More on that below.
Swing Gate Installation
Swing gates remain the most popular for single-family Reseda homes, usually in steel or aluminum. A single swing gate with operator runs $3,200 to $7,000. A double swing gate wider than 12 feet total runs $5,500 to $12,000 when you factor in twin operators, heavier posts, and the extra labor of getting both leaves timed right. We mention timing because on a 105-degree Reseda afternoon, an out-of-sync double gate is a burned-out motor waiting to happen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Reseda
We’re certified to install and service nine major gate operator brands, including FAAC, BFT, Linear, and Viking. If you’ve got an old Linear opener that’s been chugging since the Reagan administration, we can keep it running or replace it with a modern unit that won’t fight you on a hot day. We stock Gate Parts & Welding - Reseda supplies like common circuit boards, limit switches, and remotes locally, so most Reseda calls don’t wait on a parts shipment from across the country. If a new Gatewood-installed operator fails, we come back under the 90-Day Done Right Promise and fix it. If your existing FAAC or BFT dies three years into its life, we’ll give you a straight answer on whether repair beats replacement. No phantom upsells.
Common Gate Installation Problems We See in Reseda Homes
- Earthquake-cracked footings that let posts rock. A surprising number of Gate Installation in Reseda calls trace back to the 1994 Northridge quake. The epicenter was right here. Three decades of settling have left hinge posts out of plumb, and a swing gate fixed at the hinge will re-sag within months unless the footing is broken out and repoured. We check for radial concrete cracks around every post base before we install anything.
- Valley heat expanding steel frames past their stop bolts. Reseda routinely hits 105°F in July and August. Steel gates expand, heavy frames bind against the stops, and operators strain and eventually burn out or strip limit switches. We size motors for the gate’s true hot-weather weight, not its mild-morning weight.
- Santa Ana winds racking lightweight gates off their hinges. Fall wind events hit the Valley harder than the coast. Aluminum gates and old ornamental iron get twisted, panels pull, and slide gates jump their roller tracks. We reinforce frames and specify gauge and bracing that holds up to real wind load, not a showroom guess.
- Old 50-to-70-year-old gate frames with hidden fatigue cracks. Most original Reseda gates are as old as the houses. Weld joints crack at the corners after decades of heat cycling. We inspect the full frame at install and, when it’s worth saving, weld it on site rather than pushing a new gate you don’t need.
Pricing for Gate Installation in Reseda, CA
Here are the numbers we actually quote in Reseda. A basic single swing gate install starts around $2,600 to $3,800 without an operator. A powered single swing gate lands between $3,800 and $7,000. A double swing gate with operators and repoured footings runs $6,500 to $12,000. A new slide gate on a fresh track pad is $4,500 to $9,500. Pedestrian gates run $900 to $2,600. Factors that move the price: gate width and weight, whether we’re breaking out old earthquake-damaged footings, the operator brand, Reseda Gate Access Control (keypad, intercom, loop detector), and any on-site welding. The price we quote is the price you pay, agreed in writing before we start. We don’t show up and add line items at the door. Call (350) 247-4763 for a free measure and written estimate. Free estimates are standard for every Reseda job, and there’s no trip charge inside the county.
We Also Serve Cities Near Reseda
Gatewood Fence & Gate handles gate installation in Reseda and the surrounding San Fernando Valley communities, including Tarzana, Northridge, Encino, and Panorama City. If you’re just across the line in Tarzana with the same cracked post footing problem, call us. We’re already in the area most days.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Reseda
Because the problem is almost never the hinges. In Reseda, the 1994 Northridge earthquake cracked concrete footings under thousands of gate posts, and three decades of settling has left those posts rocking slightly at the base. Adjusting a hinge on a rocking post is like tightening a door knob while the door frame falls off the wall. The fix is breaking out the old footing, repouring it plumb, and only then remounting the gate. If you’ve fixed the same sag twice in a year, call (350) 247-4763 and we’ll check the post base first. Estimates are free.
Often yes, especially where running conduit from the house to the gate would mean trenching 80 feet or more under existing concrete or mature landscaping. Solar openers run $1,400 to $3,800 added to the gate install, depending on panel size, battery capacity, and operator type. Reseda’s long sun hours make solar practical year-round, but we size the battery for cloudy weeks and daily cycles, not just best-case sunshine. Call (350) 247-4763 and we’ll tell you whether solar or a hardwired run makes sense for your driveway. The estimate is free.
Only after the footings are corrected. We repour post bases that show radial cracks or any movement at the base, then set the gates plumb and install operators sized for the gate’s true operating weight. On a long drive off Vanalden Avenue, we replaced a 16-foot double swing gate with a Viking rack and pinion slide operator after the original hinge posts showed exactly those quake-era radial cracks. We broke out and repoured both post footings, set the track on a new pad, and wired in a solar opener with keypad entry and a loop detector. That owner now opens a 900-pound gate without binding even on 105-degree Valley afternoons. Call (350) 247-4763 to have yours measured and priced. Free estimates.
Only if we repour the pad first. Cracks that have widened since 1994 will throw the track out of level and the gate will bind or jump the rail. We break out the damaged section, pour a fresh reinforced pad for the track run, then set the gate. Total slide gate installs with pad replacement typically run $4,500 to $9,500 in Reseda. We’ll give you a written price before any work begins. Call (350) 247-4763 to schedule a free measure.
California and UL 325 require entrapment protection on every new automatic gate: photo-eye sensors or contact edges at the open and close paths, a reversing mechanism, and for slide gates, proper guarding to prevent fingers or hands from reaching the rack and pinion. Gatewood Fence & Gate installs every automatic gate with compliant safety edges, sensors, and warning signage. We also test the reverse function in front of you before we call the job done. Call (350) 247-4763 and we’ll walk you through what your specific setup needs. Estimates are free.
Get Your Reseda Gate Installed Right the First Time
We’re the owner-operated company with the shop down the road and a live person on the phone 24 hours a day. You’ll get a written price before any work starts, a 90-Day Done Right Promise in writing, and a gate that’s set in footings built for the next thirty years, not the next three. If it’s not done right, we make it right. Call (350) 247-4763 now for a free estimate on gate installation anywhere in Reseda, Tarzana, Northridge, Encino, or Panorama City.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Reseda since 2001.